Electric shocks can not only be painful, they can be a severe safety threat. In worst case scenarios, they can even be deadly. For these reasons, it is very important to know how to prevent electrical shocks in your Watertown home. Here are some great tips to prevent electrical shocks.
1. Never use electronic devices while you are in the bath tub
Water and electricity simply do not mix. If you are using an electric device in the bath tub, then you could be setting yourself up for a dangerous and potentially even life-threatening electric shock. If the device is plugged into a power outlet in the wall, then this is especially dangerous. For example, if you are charging your iPhone while taking a bath and if your iPhone drops into the bath, this could potentially create a life threatening situation. Never bring your electronic devices into the bath, and never, ever, charge them near your bath tub. If you believe that there is a dangerous water-related risk of electric shock in your home, you should call a Watertown electrician immediately to come and inspect your house.
2. Never disconnect an appliance under load
A device is “under load” when it is plugged in, turned on, and being used. When a device is underload, electrical current is running from the wiring in the wall through the electrical socket, into the power cord, and into the appliance. If you suddenly unplug the device while it is under load, then the current could arch and reach your fingers, causing a strong electric shock. This is unlikely to be dangerous for smaller appliances. However, it can be extremely dangerous and painful for larger appliances like washing machines and air conditioner units. So, you should make sure that you always turn off your appliances before you try to unplug them.
3. Turn electricity off before attempting any repairs
If you are going to try to attempt to make any sort of electrical repairs to your home yourself, then you need to make sure that you cut the flow of power off to that circuit before you begin your work. Otherwise, you could risk receiving a dangerous electrical shock if you accidentally touch a live wire. Luckily turning off the electricity in your home is relatively simple. You just go to the circuit breaker, and turn the on switch to off.
4. Use insulated tools
Using insulated tools is another way to prevent electric shock if you are planning on attempting to fix any electrical issues yourself. Insulated tools can help to prevent current from running straight up a tool like a metal pair of pliers and into your hand, giving you a shock. This should only be used as a last resort. But, it can still be very helpful in a number of circumstances.
All of the above tips can help to prevent you from experiencing a painful or potentially even deadly electric shock in your home. However, if you are having any sort of electric issues in your Watertown home, then you should strongly consider hiring a Watertown electrical contractor to come and fix them for you. Home electrical safety is not something that you should neglect.
Many people wonder if their home needs a lightning rod. Lightning rods are metal rods that are placed on top of buildings, and which are connected to the ground through wires or cables. The point of a lightning rod is to protect the home from lightning damage by re-routing electricity from a lightning bolt safely into the ground, and away from the structure of the house if the home is struck by lightning.
Lightning rods can be extremely helpful for protecting against lightning bolt damage. However, not all homes have them. Here are some things to consider if you are thinking about having a lightning rod installed in your home.
1. Lightning can cause fires and explosions to occur in your home
Lightning bolts can contain 100 million to 1 billion volts of electricity. So, if your Medford home is struck and if you do not have a lightning rod installed, then a fire can easily be started in your house by a lightning bolt. In fact, it is estimated that fire departments in the US respond to over 20,000 lightning-related fires every single year.
2. If lightning does strike your home, it can be devastating
The chances of lightning striking your home are not great. However, if it does, the result can be devastating. In fact, a single lightning strike could completely destroy your home, or cause tens of thousands of dollars’ worth of damage. However, one, or several lightning rods can provide a lot of protection and greatly reduce the risk of your home being severely damaged by a lightning strike.
3. Electricians can install lightning rods quickly and efficiently
A good Medford electrician will be able to come to your home and install an effective lightning rod system to your house. This will most likely cost a few thousand dollars. However, this cost pales in comparison to the cost of not having a lightning rod if your home is struck by lightning. So, considering the tremendous savings that you could experience by preventing losses, lightning rods can be an excellent investment.
This is especially true considering the fact that lightning-related fires and explosions can oftentimes create losses that are irreplaceable. For example, if you have a beloved painting or furniture item in your home which is unique, then it will not be able to be replaced if it is destroyed in a lightning-related fire or explosion.
Lightning rods are a very good thing to have on the roof of your home. The risk of your house being struck by lightning may not be very high. But if it is, there is a very good chance that it could cause significant damage to your home. A simple lightning rod system can be extremely effective in preventing your home from lightning damage, and you will only have to install this system once. So, it can be a very wise decision to get a lightning rod installed on your home. A good Medford electrical contractor area can come to your home and get the job done quickly. Then, you can have lightning protection for as long as your home is standing.
Expensive bills are something that most people want to avoid dealing with. This is especially true if there are simple ways to reduce these bills to make them lower. Electric bills in the winter are definitely one type of bill that is capable of being reduced. Here are some great tips for reducing your electric bill in the cold New England winters.
1. Use natural light
Even in the winter months, the sun provides plenty of light during the day. This means that you can put your blinds up and let plenty of natural light in in order to prevent having to keep your lights turned on during the days. Every hour that you use natural light instead of electric light, you are saving money.
2. Wear Layers
Yes, it does get very cold in Boston and Braintree in the winter months. However, you can combat this by wearing layers of clothing. If you have some nice warm sweaters or turtlenecks, then take advantage of them! The warmer you can make yourself through clothing, then the lower you can set your thermostat. The lower your thermostat is, the more you will save on your electric bill.
3. Make sure your insulation is optimized
The better that your home is insulated, the less heat will be required to keep it warm. The less heat that is required to keep it warm, the lower your electric bill will be. You can have an audit done by a professional electrician to let you know where your home may need additional insulation. There are also kits you can buy to make your windows more insulated. Further, you can even have a Braintree electrical contractor install an insulation covering on your hot water heater. All of these things can help to bring your electric bill down.
4. Lower the thermostat at night
Blankets and sheets can provide a large amount of warmth. For this reason, it is often possible to lower thermostats by a few degrees at night without anyone in the house becoming uncomfortably cold. You can also add a blanket or two to your bed to make it warmer. Flannel sheets are another good option for making your bed warmer.
5. Make sure you close shades and curtains at night
If you close your shades and curtains at night, then this can help to provide extra insulation, and to limit the amount of heat that escapes out through the windows. This is a very simple thing that you can do to reduce your electric bill. Closing shades and curtains can also make it darker in your bedroom, which can be good for sleep.
If you want to reduce your electric bill in the cold winter months, then following the advice in this article can help you to do so. It is also a very good idea to hire an Boston or Braintree electrician to come to your home to help you identify things that can help you reduce your electric bill.
Circuit breaker trips can be quite frustrating and annoying to deal with. When a circuit breaker trips, it can result in a certain section of your home losing power. Circuit breakers are designed to monitor circuits and break them if the circuits are getting overloaded, or if there is a short circuit. Circuit breakers are security measures that prevent fires from being started or damage from occurring to the electrical wiring of your home.
So, even though they are annoying to deal with, they serve a vital purpose. Here are some of the top reasons why your circuit breaker might be tripping.
If the wiring in your home is very old, and is starting to get worn out, then this can cause frequent short circuits, which result in circuit breaks. This common older homes in the Newton and Boston area. If your circuit breakers keeps tripping and if you don’t know why, then this could definitely be the cause. If you suspect this is happening at your home, then you should strongly consider calling a good Newton electrician or Boston electrical contractor.
For example, if you put a large flat screen tv, a stereo system, guitar amps, a lava lamp, a Nintendo system, and many other electricity requiring machines in one room and turn them all on at the same time, this could overload your circuit and cause the circuit breaker to activate. To prevent this, you should try to spread out your electricity requiring machines/devices throughout multiple areas of the house.
High-draw appliances are appliances that use large amounts of power. Such appliances include hair dryers, portable heaters, and vacuum cleaners. If you use several of these appliances at the same time, in the same area of your house, it can definitely cause a circuit break to occur. You should try to use these appliances on dedicated high-draw circuits. Good electrical contractors in Boston can show you which circuits these are if you are unsure.
Circuit breakers can experience wear and tear over time too, just like appliances and wiring. If your circuit breakers are very old, then they can start randomly breaking circuits when there is actually no problem. If this is happening to you, then it would be wise for you to get your circuit breakers replaced by a professional electrician.
There are many different things that can cause a circuit breaker to trip. The four listed above are some of the most common reasons. If your circuit breaker trips, then you may be able to solve the problem yourself simply by using fewer appliances at the same time, or moving some appliances to a different area of the home. However, if your circuit breaker is repeatedly tripping and if you can’t figure out why, then a good Newton or Boston electrician will be able to resolve this issue for you. So, don’t hesitate to call an electrical contractor to get this problem fixed soon.
Electrical fires are one of the single greatest threats to your home and to your safety. There are an estimated 51,000 electrical fires that take place every year. These fires cause an average of $1.3 billion in property damages, thousands of injuries, and hundreds of deaths. However, despite the fact that electrical fires can be extremely dangerous, many of these fires can be prevented by taking precautionary measures. Here are some steps that you can take to prevent electrical fires in your Boston area home.
Be extremely careful with space heaters
Many people use space heaters, especially in Massachusetts towns like Allston, Roxbury, and Brookline. This is because space heaters can help to provide additional heat in the cold New England winter months. However, space heaters create a distinct threat of creating electric fires. This is because they generate a lot of heat, they use very high levels of wattage, and they run hotter than ovens in many cases.
So, the best thing you can do is not use a space heater if it is not necessary. However, if you do decide to use one, then make sure that your space heater is placed far away from any flammable items such as curtains, blankets, etc. If you have any questions about whether or not your space heater is safe, or about general home electrical safety, you can call an electrician in Boston to come out and inspect your space heater.
Get a thorough electrical inspection
Many homes in the Boston area, or in the surrounding towns like Medford, Chelsea, and Everett are very old, and could have damaged or faulty wiring. This is especially true if your home is over 100 years old. If your home has aluminum wiring, this can also put you at a higher risk for electrical fires.
The best way to check all of your home’s wiring to make sure that everything is safe is to have a thorough electrical inspection carried out by a professional electrical contractor. There are many electricians in Boston who are capable of doing this job.
Do not overburden electrical outlets
If you plug too many cords into an electrical outlet at once, then this can create a major strain on the outlet. It can also become dangerous, and be a serious fire hazard. This is especially true if everything that is plugged in is turned on at the same time.
There are several ways that you can cope with this safety hazard. The first is to simply unplug certain power cords if you have too many of them plugged in. The second is to buy power strips that have internal overload protection features built into them. Internal overload protection features automatically shut off the power strip as soon as it is overloaded. If you have questions about preventing overburdening your power outlets, then you can call a Boston electrician or an electrical contractor in the surrounding areas to provide you with assistance.
Home electrical safety is something that is extremely important for preventing electrical fires. If your home has not been inspected by a licensed electrician in a while, then you should strongly consider hiring one to come to your home and take a look at your wiring, light fixtures, outlets, and other electrical home features. A quick inspection can prevent a major disaster.