Smoke detectors are one of the most important features of any home. This is because the smoke detectors are often the difference between a person surviving or dying in a house fire. Approximately 2000 to 3000 people die in fires every year in the United States. Many of the people who died in fires do so because the building had no smoke detectors, or the smoke detectors were not working at the time of the fires.
Because smoke detectors are so important when it comes to saving lives and home electrical safety, it is a very good idea to understand how they work. This article will provide a brief overview of how smoke detectors work.
Ionization Smoke Detectors
Ionization smoke detectors one of the two main types of smoke detectors. These smoke detectors are set up so that a tiny amount of radioactive material rests between two metal plates. This radioactive material is americium-241. A constant small electrical charge exists between the two metal plates. The smoke alarm is triggered when smoke floats up into the chamber and disturbs the electrical charge between the two plates. Typically, the alarm noise will be extremely loud and will awake anyone in the home or other building who may be sleeping or otherwise unaware of the fact that a fire is burning in the building.
Photoelectric Smoke Detectors
Photoelectric smoke detectors are the other primary type of smoke detector. These smoke detectors work in a different way to ionization smoke detectors. The way that photoelectric smoke detectors work is by sending a tiny beam of light from a diode to a sensor chamber. When smoke enters the chamber, it disrupts this light beam and triggers the alarm. Again, with this type of alarm, the noise is very loud, and it should easily be able to awake anyone who is sleeping in the home or building, or who may otherwise not be aware that there is a fire in the building.
The Importance of Having Smoke Detectors
The importance of having either an ionization or photoelectric smoke detector in your Revere or Waltham home cannot be understated. If a fire breaks out in your home, then it can easily destroy the home because you severe harm or even death. Because of this, you need to make sure that you have an adequate number of working smoke alarms in your Revere or Waltham home. If you are unsure of whether or not you have enough smoke alarms, or whether or not they are working, then you can call a good Revere or Waltham residential electrician to come and take a look.
A good Revere or Waltham electrical contractor will easily be able to tell whether or not you have enough smoke alarms and whether or not they are in good working order. If the Revere or Waltham professional electrician believes that you need to add more smoke detectors, or to replace some of your existing ones, then he or she can easily to this for you.
Optimal security is one thing that many Arlington home and business owners want to have. For this reason, many of them get security systems, strong locks, and even dogs because dogs tend to bark when there is a disturbance at night. However, another layer of security that some homeowners neglect is outdoor security lighting.
What is outdoor security lighting?
Outdoor security lighting is lighting that comes from lights which are placed strategically around the outside of a home or business. The purpose of using outdoor lighting is to deter crime. Outdoor security lighting deters crime by eliminating the darkness around a property and making it significantly more difficult for criminals to operate without detection. Outdoor security lights can either be set to turn on when they sense motion, or they can be set to go on at a certain time and to stay on until a certain time.
How effective is outdoor security lighting at deterring crime?
Outdoor lighting will not deter one hundred percent of criminals from breaking into your Arlington home or business. However, it can definitely make your property a more difficult target. This can go a long way towards making criminals decide to skip your property when they are planning a robbery. After all, most criminals do not want to get caught. So the more difficult you make it for them to avoid getting caught, the better.
Outdoor security lighting makes it much easier to see the criminals carrying out their crime. It also makes it easier for security cameras to capture footage of the crime. Criminals do not know whether or not you have security cameras. All they know is that it is easier to be seen in a lighted area. So, yes, outdoor security lighting can make your property significantly less appealing to criminals, even if it is not a failsafe security measure.
How to set up outdoor security lighting
The best way to set up outdoor security lighting for your Arlington home or business is to simply called a Boston or Arlington electrical contractor. The electrician can come to your home, evaluate your property, figure out where the best places to install the lights are, and then install them. A good professional electrician will be able to do this job efficiently and cost effectively. It also should not take him or her more than a couple of hours.
Should you move forward with the purchase?
Outdoor security lighting is something that can help you to protect your personal possessions, your business, and your loved ones from criminals. It is a relatively simple thing that you can do to increase security at your property. If you do not already have outdoor security lights installed, then you should strongly consider getting them put on your property. If you do not want to be bothered by bright light at night, then you can simply get motion detecting lights. These lights only turn on when there is a clear motion that happens in front of them. If you would like to install outdoor security lights, then you can call an Arlington electrician to get started today.
If your light bulbs are regularly blowing out, then this can be extremely frustrating. Not only does it most likely indicate that there is a problem, but it can also force you to keep buying new light bulbs more than you probably want to.
So, if you are noticing that your light bulbs keep blowing out in one spot in your house, or in multiple spots, here is what could be behind it.
1. Poor quality light bulbs
Not all light bulbs are created equally. In fact, some light bulbs are very low-quality compared to others. Lower quality light bulbs tend to have filaments that are very thin. The thinner the filament, the more likely the light bulbs is to blow out. Light bulbs break at their weakest part. So, if the filament is already thin to begin with, then, it can make it more susceptible to blowing out.
2. High Voltage
High levels of voltage, even if they only occur briefly can cause a light bulb to blow out. This is because they can cause excess heat, which can result in damage occurring to the light bulb. If you suspect that your home may be experiencing higher than normal levels of voltage for any reason, then it may be wise to call an Allston electrical contractor to come and investigate the issue. The electrician would be able to diagnose the problem for you and resolve it in a quick and efficient manner.
Vibrations can be another source of the problem. Light bulbs are very delicate, so if there are appliances nearby that vibrate strongly, or emit strong sound waves, these could create enough vibration over time to damage a light bulb filament. If there is high foot traffic in the room or on the floor above, then this could also hypothetically cause damage to the filament. So, if you think that this could be happening to you, then you should try to eliminate sources of high vibration.
4. Arching Electricity
Arching electricity occurs when the light bulb is not screwed in tightly enough and when the electricity starts to arch between the bottom of the bulb and the socket. When this happens, it can cause excess heat to be generated, resulting in a blowout of the light bulb.
How to solve these problems
The best way to solve these problems is to simply call an Allston electrician or another licensed electrician in the Boston area to come and investigate the problem. Because of their training and skill, a good electrical contractor will be able to diagnose the problem quickly, and resolve it for you.
Another thing that you can do is switch to LED light bulbs. The price of LED light bulbs is getting lower and lower, and LED light bulbs are extremely long-lasting and energy efficient. Further, LED light bulbs are also nowhere near as vulnerable to vibrations as traditional light bulbs are.
So, for example, an earthquake may break an LED light bulb, but people running upstairs or a guitar amplifier emitting strong sound waves are very unlikely to blow it out or cause it to break.
Many people consider buying backup power generators for their homes. Backup generators can be extremely beneficial in New England, and especially in the Boston area. This is because they can provide electrical power to a home even if the primary power source is knocked out during a storm.
Boston tends to experience a large amount of serious storms throughout the year. Many of these storms have high winds and large amounts of snow. These intense storms frequently knock out powerlines and cause many homes in the Boston area to lose power. Losing power in the winter months can lead to extremely cold temperatures inside the home, which is not only uncomfortable but can also be dangerous.
Backup generators solve this problem by providing a secondary source of power to a home if the primary source is knocked out. Large backup generators are typically installed outside of the home and are connected to a gas line, which is what they run on. Many home generators can also be set up to automatically monitor the amount of power in a home. If this power level drops, then the generator can automatically turn on to supply power to the home.
This way the home never has to be without power, even in the middle of the harshest winter storm, and even if power has been knocked out in all of the surrounding homes in the neighborhood.
How much does it cost to have a generator installed?
The cost of generator installation can vary dramatically depending on the size of the generator. Smaller generators which can only run a few household systems and have a max output of 7-10KW, only cost about $1,000 to install and about $2,500 - $4,000 to purchase. However, larger systems which can power your whole house for long periods of time and which have a max output of 22-45 KW can cost several thousand dollars to install, and $9,000 - $15,000 to purchase.
So, buying a backup generator and having it installed can be a significant expense. However, if you have ever gone through a power outage in Boston in January, then you know exactly how important it can be to make sure that you have power all year long. This is especially true if you have young children or elderly people living in your house with you.
How do you get a generator installed?
The best way to get a generator installed in your Boston or South Boston home is to call a South Boston electrical contractor, or a professional electrician in Boston to come and set it up. Unless you are a trained electrician, you should definitely not try to do the installation yourself. It could potentially be very dangerous. It is always wise to practice home electrical safety and that means letting a licensed electrician take care of the generator installation. An electrician will be able to take care of the installation efficiently and in a very secure manner.
Electric shocks can not only be painful, they can be a severe safety threat. In worst case scenarios, they can even be deadly. For these reasons, it is very important to know how to prevent electrical shocks in your Watertown home. Here are some great tips to prevent electrical shocks.
1. Never use electronic devices while you are in the bath tub
Water and electricity simply do not mix. If you are using an electric device in the bath tub, then you could be setting yourself up for a dangerous and potentially even life-threatening electric shock. If the device is plugged into a power outlet in the wall, then this is especially dangerous. For example, if you are charging your iPhone while taking a bath and if your iPhone drops into the bath, this could potentially create a life threatening situation. Never bring your electronic devices into the bath, and never, ever, charge them near your bath tub. If you believe that there is a dangerous water-related risk of electric shock in your home, you should call a Watertown electrician immediately to come and inspect your house.
2. Never disconnect an appliance under load
A device is “under load” when it is plugged in, turned on, and being used. When a device is underload, electrical current is running from the wiring in the wall through the electrical socket, into the power cord, and into the appliance. If you suddenly unplug the device while it is under load, then the current could arch and reach your fingers, causing a strong electric shock. This is unlikely to be dangerous for smaller appliances. However, it can be extremely dangerous and painful for larger appliances like washing machines and air conditioner units. So, you should make sure that you always turn off your appliances before you try to unplug them.
3. Turn electricity off before attempting any repairs
If you are going to try to attempt to make any sort of electrical repairs to your home yourself, then you need to make sure that you cut the flow of power off to that circuit before you begin your work. Otherwise, you could risk receiving a dangerous electrical shock if you accidentally touch a live wire. Luckily turning off the electricity in your home is relatively simple. You just go to the circuit breaker, and turn the on switch to off.
4. Use insulated tools
Using insulated tools is another way to prevent electric shock if you are planning on attempting to fix any electrical issues yourself. Insulated tools can help to prevent current from running straight up a tool like a metal pair of pliers and into your hand, giving you a shock. This should only be used as a last resort. But, it can still be very helpful in a number of circumstances.
All of the above tips can help to prevent you from experiencing a painful or potentially even deadly electric shock in your home. However, if you are having any sort of electric issues in your Watertown home, then you should strongly consider hiring a Watertown electrical contractor to come and fix them for you. Home electrical safety is not something that you should neglect.
Many people wonder if their home needs a lightning rod. Lightning rods are metal rods that are placed on top of buildings, and which are connected to the ground through wires or cables. The point of a lightning rod is to protect the home from lightning damage by re-routing electricity from a lightning bolt safely into the ground, and away from the structure of the house if the home is struck by lightning.
Lightning rods can be extremely helpful for protecting against lightning bolt damage. However, not all homes have them. Here are some things to consider if you are thinking about having a lightning rod installed in your home.
1. Lightning can cause fires and explosions to occur in your home
Lightning bolts can contain 100 million to 1 billion volts of electricity. So, if your Medford home is struck and if you do not have a lightning rod installed, then a fire can easily be started in your house by a lightning bolt. In fact, it is estimated that fire departments in the US respond to over 20,000 lightning-related fires every single year.
2. If lightning does strike your home, it can be devastating
The chances of lightning striking your home are not great. However, if it does, the result can be devastating. In fact, a single lightning strike could completely destroy your home, or cause tens of thousands of dollars’ worth of damage. However, one, or several lightning rods can provide a lot of protection and greatly reduce the risk of your home being severely damaged by a lightning strike.
3. Electricians can install lightning rods quickly and efficiently
A good Medford electrician will be able to come to your home and install an effective lightning rod system to your house. This will most likely cost a few thousand dollars. However, this cost pales in comparison to the cost of not having a lightning rod if your home is struck by lightning. So, considering the tremendous savings that you could experience by preventing losses, lightning rods can be an excellent investment.
This is especially true considering the fact that lightning-related fires and explosions can oftentimes create losses that are irreplaceable. For example, if you have a beloved painting or furniture item in your home which is unique, then it will not be able to be replaced if it is destroyed in a lightning-related fire or explosion.
Lightning rods are a very good thing to have on the roof of your home. The risk of your house being struck by lightning may not be very high. But if it is, there is a very good chance that it could cause significant damage to your home. A simple lightning rod system can be extremely effective in preventing your home from lightning damage, and you will only have to install this system once. So, it can be a very wise decision to get a lightning rod installed on your home. A good Medford electrical contractor area can come to your home and get the job done quickly. Then, you can have lightning protection for as long as your home is standing.
Expensive bills are something that most people want to avoid dealing with. This is especially true if there are simple ways to reduce these bills to make them lower. Electric bills in the winter are definitely one type of bill that is capable of being reduced. Here are some great tips for reducing your electric bill in the cold New England winters.
1. Use natural light
Even in the winter months, the sun provides plenty of light during the day. This means that you can put your blinds up and let plenty of natural light in in order to prevent having to keep your lights turned on during the days. Every hour that you use natural light instead of electric light, you are saving money.
2. Wear Layers
Yes, it does get very cold in Boston and Braintree in the winter months. However, you can combat this by wearing layers of clothing. If you have some nice warm sweaters or turtlenecks, then take advantage of them! The warmer you can make yourself through clothing, then the lower you can set your thermostat. The lower your thermostat is, the more you will save on your electric bill.
3. Make sure your insulation is optimized
The better that your home is insulated, the less heat will be required to keep it warm. The less heat that is required to keep it warm, the lower your electric bill will be. You can have an audit done by a professional electrician to let you know where your home may need additional insulation. There are also kits you can buy to make your windows more insulated. Further, you can even have a Braintree electrical contractor install an insulation covering on your hot water heater. All of these things can help to bring your electric bill down.
4. Lower the thermostat at night
Blankets and sheets can provide a large amount of warmth. For this reason, it is often possible to lower thermostats by a few degrees at night without anyone in the house becoming uncomfortably cold. You can also add a blanket or two to your bed to make it warmer. Flannel sheets are another good option for making your bed warmer.
5. Make sure you close shades and curtains at night
If you close your shades and curtains at night, then this can help to provide extra insulation, and to limit the amount of heat that escapes out through the windows. This is a very simple thing that you can do to reduce your electric bill. Closing shades and curtains can also make it darker in your bedroom, which can be good for sleep.
If you want to reduce your electric bill in the cold winter months, then following the advice in this article can help you to do so. It is also a very good idea to hire an Boston or Braintree electrician to come to your home to help you identify things that can help you reduce your electric bill.
Circuit breaker trips can be quite frustrating and annoying to deal with. When a circuit breaker trips, it can result in a certain section of your home losing power. Circuit breakers are designed to monitor circuits and break them if the circuits are getting overloaded, or if there is a short circuit. Circuit breakers are security measures that prevent fires from being started or damage from occurring to the electrical wiring of your home.
So, even though they are annoying to deal with, they serve a vital purpose. Here are some of the top reasons why your circuit breaker might be tripping.
If the wiring in your home is very old, and is starting to get worn out, then this can cause frequent short circuits, which result in circuit breaks. This common older homes in the Newton and Boston area. If your circuit breakers keeps tripping and if you don’t know why, then this could definitely be the cause. If you suspect this is happening at your home, then you should strongly consider calling a good Newton electrician or Boston electrical contractor.
For example, if you put a large flat screen tv, a stereo system, guitar amps, a lava lamp, a Nintendo system, and many other electricity requiring machines in one room and turn them all on at the same time, this could overload your circuit and cause the circuit breaker to activate. To prevent this, you should try to spread out your electricity requiring machines/devices throughout multiple areas of the house.
High-draw appliances are appliances that use large amounts of power. Such appliances include hair dryers, portable heaters, and vacuum cleaners. If you use several of these appliances at the same time, in the same area of your house, it can definitely cause a circuit break to occur. You should try to use these appliances on dedicated high-draw circuits. Good electrical contractors in Boston can show you which circuits these are if you are unsure.
Circuit breakers can experience wear and tear over time too, just like appliances and wiring. If your circuit breakers are very old, then they can start randomly breaking circuits when there is actually no problem. If this is happening to you, then it would be wise for you to get your circuit breakers replaced by a professional electrician.
There are many different things that can cause a circuit breaker to trip. The four listed above are some of the most common reasons. If your circuit breaker trips, then you may be able to solve the problem yourself simply by using fewer appliances at the same time, or moving some appliances to a different area of the home. However, if your circuit breaker is repeatedly tripping and if you can’t figure out why, then a good Newton or Boston electrician will be able to resolve this issue for you. So, don’t hesitate to call an electrical contractor to get this problem fixed soon.
Electrical fires are one of the single greatest threats to your home and to your safety. There are an estimated 51,000 electrical fires that take place every year. These fires cause an average of $1.3 billion in property damages, thousands of injuries, and hundreds of deaths. However, despite the fact that electrical fires can be extremely dangerous, many of these fires can be prevented by taking precautionary measures. Here are some steps that you can take to prevent electrical fires in your Boston area home.
Be extremely careful with space heaters
Many people use space heaters, especially in Massachusetts towns like Allston, Roxbury, and Brookline. This is because space heaters can help to provide additional heat in the cold New England winter months. However, space heaters create a distinct threat of creating electric fires. This is because they generate a lot of heat, they use very high levels of wattage, and they run hotter than ovens in many cases.
So, the best thing you can do is not use a space heater if it is not necessary. However, if you do decide to use one, then make sure that your space heater is placed far away from any flammable items such as curtains, blankets, etc. If you have any questions about whether or not your space heater is safe, or about general home electrical safety, you can call an electrician in Boston to come out and inspect your space heater.
Get a thorough electrical inspection
Many homes in the Boston area, or in the surrounding towns like Medford, Chelsea, and Everett are very old, and could have damaged or faulty wiring. This is especially true if your home is over 100 years old. If your home has aluminum wiring, this can also put you at a higher risk for electrical fires.
The best way to check all of your home’s wiring to make sure that everything is safe is to have a thorough electrical inspection carried out by a professional electrical contractor. There are many electricians in Boston who are capable of doing this job.
Do not overburden electrical outlets
If you plug too many cords into an electrical outlet at once, then this can create a major strain on the outlet. It can also become dangerous, and be a serious fire hazard. This is especially true if everything that is plugged in is turned on at the same time.
There are several ways that you can cope with this safety hazard. The first is to simply unplug certain power cords if you have too many of them plugged in. The second is to buy power strips that have internal overload protection features built into them. Internal overload protection features automatically shut off the power strip as soon as it is overloaded. If you have questions about preventing overburdening your power outlets, then you can call a Boston electrician or an electrical contractor in the surrounding areas to provide you with assistance.
Home electrical safety is something that is extremely important for preventing electrical fires. If your home has not been inspected by a licensed electrician in a while, then you should strongly consider hiring one to come to your home and take a look at your wiring, light fixtures, outlets, and other electrical home features. A quick inspection can prevent a major disaster.
Ever since the first commercially viable lightbulb was created by Thomas Edison in 1878, electricity has become a common feature in most homes in America. Electricity is used for everything from lighting to heating to powering machines and appliances. However, despite the fact that electricity has been in homes for almost 140 years, it is still a powerful force, and sometimes things can go wrong with it in homes.
Here are some of the top 3 most common electric issues in homes.
Exposed wires can be a major issue because they can cause serious shocks to anyone who touches them. They can also potentially cause fires. Wires can become exposed if they have split ends, or if they are not properly sealed or protected. A good electrical contractor will be able to fix this issue for you.
Many homes in Boston, Somerville, Dorcester, Cambridge, and other Boston area locations are old and may have wires that need to be replaced because they are worn out or have gotten damaged. Homes with unfinished areas can also be at risk of having exposed wires. If you feel that your home has exposed wires that could be dangerous, then you should call a commercial electrician immediately.
Overlamping/overloading is when you accidentally put a light bulb in a light fixture that has a wattage level that is too high for the specific fixture. This can be a problem because it can result in the lightbulb becoming too hot for the fixture to handle. When this occurs, the lightbulb can melt the socket. If this problem is not corrected, it can result in damage to the light fixture, and sparks or possibly fires can occur.
If you suspect that you may have an overlamping or overloading issue, then an electrical contractor can come to your home, inspect the issue, and fix the problem if there is one. Many Boston electricians are highly professional and skilled and can quickly resolve this issue for you.
Light Switches that Don’t Work
Whether you live in Braintree, Lexington, Quincy, or any other town, light switches that don’t work can be a major nuisance. If your light switches are not working, then there could be a number of reasons why. First, there could be faulty wiring. Second, there could be an issue with the outlet or with the circuit. Finally, it could be the result of poor workmanship or sub-standard products.
Regardless of the exact nature of the issue, a good residential electrician or electrical contractor will be able to resolve this issue for you. So, if your lights are not working, then you should call a Boston electrician to get this problem fixed.
Electric issues in your home can be very annoying, and sometimes even dangerous. For this reason, if you are experiencing one of the three issues mentioned in this article, or any other electric problems in your house or apartment, then you should strongly consider hiring a licensed electrician in Massachusetts to help you fix the problem. After all, the old saying really is true, it is better to be safe than sorry.